Arc Flat Base Bracket
Arc Flat Base Bracket
6 in stock
*This is a single bottle. Please check the quantity before adding to your cart.*Screws are not included.
Couldn't load pickup availability
A flat base bracket with an impressive kamaboko-shaped base
A mysterious design that almost looks like a face.
By using a flat base for the standard L-shaped bracket, it can be installed in places with limited space, and there is no interference with metal parts when creating shelves with multiple levels.
The shelf part is made of the same semicircular material as the Bent series, so it blends in with the base. The modern impression and rounded design create an atmosphere that is neither too sweet nor too spicy in your room.
[Product Details]
Size: W50×H50×D104mm (1 piece)
Material: Brass
Accessories: None *Screws are not included.
[Recommended screws]
For wall mounting: brass round head Phillips wood screw 8 x 4.1 x 25 mm
For shelves: brass round head Phillips wood screws (8 x 4.1 x 16 mm)
remarks
- When the shelf is installed, there will be a gap of approximately 4 mm between the wall and the shelf, which is the thickness of the base.
- This product is handmade, so there may be slight individual differences in dimensions.
- This product has not been polished after processing. There may be small scratches, patterns, or discoloration inherent to the material. Please note that all of these are considered to be within the range of good quality.
- This product is made of brass. Discoloration, verdigris, and blackening may occur over time. If you are concerned about these, you can maintain it with commercially available brass polish or Pical.
- When installing, please prepare screws appropriate for the location and material.
Handling of brass products
About brass and aging
- Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
- Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
- In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
- Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
- If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )
* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.
Care instructions
- If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
- If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
- If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
- If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
- Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.