1 8

[In stock now] KT brass bracket light

[In stock now] KT brass bracket light

取り寄せ商品 Order 納期: 2–3 weeks Delivery time: 2–3 weeks

$2,145.00
$2,145.00
Sale Sold out
Shipping calculated at checkout.

2 in stock

*Please note that the delivery date may vary depending on the manufacturer's stock status.

A wall light with a shade and bracket integrated into one unit

The shade part is made by skilled craftsmen one by one by hand using a technique called "spatula drawing", which involves stretching and shaping metal sheets.
The thick brass shade is approximately 3mm thick and has rounded edges, giving it a shape that is surprisingly soft and airy, despite being made of metal.

Bracket lights are a type of lighting that is attached directly to a wall.
If you install it in the entrance hall or hallway, it will become an iconic presence in the house, and if you install it in the bathroom or toilet, it will enhance the interior décor to match the decor.
You can also use it as indirect lighting in the living room or as a night light in the bedroom, and enjoy the lighting effects that are only possible because it is close to the wall.

[Backordered item] (Normal delivery time: 2-3 weeks *May vary depending on manufacturer stock availability)

[Product Details]

Size: Approx. W140 x D190 x H130mm (base diameter approx. 45mm)

Material: Brass, etc.

Weight: Approx. 490g

Accessories: Brass screws

Base: E17

Compatible bulbs: LED bulbs, incandescent bulbs up to 60W

Notes:

*The shade and bracket are integrated into the lighting fixture. Please note that the shade cannot be removed.

*This product is intended for indoor use. It is not waterproof, rainproof, or moisture-proof, so please refrain from using it outdoors or in hot and humid places such as bathrooms.

* Installation must be performed by a qualified electrician. Installation by unqualified persons should never be performed as there is a risk of fire.

*Please note that due to the manufacturing process, minor scratches may be found on some products, but these are within the range of acceptable quality.

照明器具および各種電気製品の海外使用につきまして 当製品は日本国内の電気設備仕様に基づいて設計・製造されております。 そのため、日本国外でのご使用される際は製品が正常に使用・作動できず、故障や発火の原因となる場合がございます。 また、日本国外での使用による損害や故障に関しては、当社は一切の責任を負いかねますので、予めご了承ください。

For overseas customers This product is designed and manufactured based on electrical equipment specifications in Japan. Therefore, when used outside of Japan, the product may not be able to be used or operated properly, which may cause malfunction or fire. Please also note that our company cannot be held responsible for any damage or malfunction caused by use outside Japan.

View full details

Handling of brass products

About brass and aging

  • Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
  • Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
  • In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
  • Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
  • If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )

* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.

Care instructions

  • If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
  • If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
  • If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
  • If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
  • Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.