MARINE BRACKET (Black) bracket light
MARINE BRACKET (Black) bracket light
12 in stock
Couldn't load pickup availability
A bracket light inspired by marine lighting
This handmade bracket was made with brass wire, processed, welded and assembled in the image of marine lighting. The simple design makes it easy to match with any interior style. When you turn on the light, you can enjoy the shadow cast by the wire shade. It has a chic black dyed finish with an uneven texture.
[Product Details]
Size (mm): Shade + fixture D145 / Shade φ105 / Base φ65
Color: Black (dyed)
Material: Brass
Base: E17 / Supports up to 60W
specification
- Can be mounted on the ceiling
Accessories: Wood screws
Installation method: *This product requires wiring. Please ask an electrician to install it. Amateur wiring may cause electric shock or fire, and the installer will be responsible for all damages that occur, so please do not do it.
remarks
- Bulbs are not included.
- LED bulbs can also be used.
- Install the bulb without removing the shade.
- This product is for indoor use only.
- When carrying out electrical work, please be careful not to pull the cord too hard. (Please be careful when splitting the cord in two, etc.)
Please review handling precautions and shade removal instructions.
Download the Notice (PDF)
照明器具および各種電気製品の海外使用につきまして 当製品は日本国内の電気設備仕様に基づいて設計・製造されております。 そのため、日本国外でのご使用される際は製品が正常に使用・作動できず、故障や発火の原因となる場合がございます。 また、日本国外での使用による損害や故障に関しては、当社は一切の責任を負いかねますので、予めご了承ください。
For overseas customers This product is designed and manufactured based on electrical equipment specifications in Japan. Therefore, when used outside of Japan, the product may not be able to be used or operated properly, which may cause malfunction or fire. Please also note that our company cannot be held responsible for any damage or malfunction caused by use outside Japan.
Handling of brass products
About brass and aging
- Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
- Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
- In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
- Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
- If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )
* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.
Care instructions
- If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
- If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
- If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
- If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
- Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.