Futagami Pendant Lamp Pleated Long Cast Skin
Futagami Pendant Lamp Pleated Long Cast Skin
受注生産商品 Made to order 納期: About 3 to 4 months Delivery time: About 3 to 4 months
For sale
Couldn't load pickup availability
A pendant lamp that resembles the pleats of a skirt
The outside of this pendant lamp is left as it is. Although dust tends to accumulate on pendant lamps, the small amount of dust blends in with the texture of the cast surface and is not a concern. The inside is carved out to reflect light beautifully.
The delicate pleats and soft curves of this design make it a perfect match for antique and classic interiors.
[Made to order] (Delivery time: approx. 3 to 4 months)
[Product Details]
Size (mm): φ180×H210 (internal socket 30)
Cord length: Can be specified within the range of 10cm to 120cm.
*A cord extension fee will be charged for lengths over 71cm.
*Please contact us if you would like a size larger than 120cm.
Weight: Approx. 2,300g (shade + cord)
*This is an approximate weight due to individual differences.
Light bulb: E17 type (both incandescent and LED bulbs are acceptable)
*Light bulbs are not included.
Compatible ceilings: Square hook-in ceilings / Round hook-in ceilings *Rosettes and recessed ceilings cannot be installed as is.
Installation is possible if you use the "Panasonic Extension Adapter Type 1",
Please note that the seal itself does not fit inside the cup.
Accessories: Brass sealing cup (inner diameter Φ approx. 71 mm)
[About aging]
Compared to kitchen utensils and tableware, pendant lamps are handled less frequently and therefore do not change significantly. However, over the years the color of the brass will deepen and develop a more tasteful character.
If you touch the inside with your hands, you will leave fingerprints on it, so please wear gloves when cleaning or replacing the light bulb.
[Care instructions]
If you notice dust or dirt on the outside of the lamp, use a handheld mop to brush off the dust. If the dust cannot be removed with a mop, you can also wipe it off with wet tissue or a tightly wrung out cloth.
照明器具および各種電気製品の海外使用につきまして 当製品は日本国内の電気設備仕様に基づいて設計・製造されております。 そのため、日本国外でのご使用される際は製品が正常に使用・作動できず、故障や発火の原因となる場合がございます。 また、日本国外での使用による損害や故障に関しては、当社は一切の責任を負いかねますので、予めご了承ください。
For overseas customers This product is designed and manufactured based on electrical equipment specifications in Japan. Therefore, when used outside of Japan, the product may not be able to be used or operated properly, which may cause malfunction or fire. Please also note that our company cannot be held responsible for any damage or malfunction caused by use outside Japan.
Handling of brass products
About brass and aging
- Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
- Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
- In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
- Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
- If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )
* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.
Care instructions
- If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
- If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
- If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
- If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
- Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.